
Structural Engineer
4 days ago
1) Structural Design & Documentation
- Perform structural analysis, member sizing, and detailing for RC, structural steel, and masonry/CHB systems: footings, tie beams, columns, beams, slabs, stairs, canopies, trusses, retaining/perimeter walls, septic tanks, and ancillary structures.
- Prepare sealed (as applicable) design calculations, GA drawings, shop drawings, bar bending schedules, and specifications.
- Execute foundation design (isolated/combined/strip/raft; basic pile caps if applicable) using soil parameters from geotechnical reports.
- Produce temporary works concepts (formwork, shoring, scaffolding, falsework) for constructability and safety.
- Run value engineering—optimize rebar, concrete volumes, and connection details without compromising safety or code.
- Coordinate with Architecture, Civil Works, and MEPF to resolve clashes, penetrations, and vibration/deflection criteria.
- Respond to RFIs, issue Design Change Notices, and maintain a clean design revision log.
- Lead or participate in design reviews (30/60/90% and IFC) and BIM coordination sessions.
- Conduct site inspections and pre-pour checks for rebar, formworks, embeds, and concrete placement.
- Review contractor shop drawings, material submittals, method statements, and concrete mix designs.
- Investigate non-conformances (NCRs); issue corrective actions and monitor closure.
- Check as-built documentation for completeness and accuracy.
- Prepare take‑offs/BOQs (rebars by diameter; concrete by mix; formworks by material) to feed procurement and cost control.
- Provide design schedules, risk registers, and inputs to project execution plans.
- Track design‑to‑budget alignment and recommend scope/cost trade‑offs early.
- Design to NSCP (latest), NBCP, and relevant DPWH Standard Specifications (Blue Book); apply ASEP guidance where appropriate.
- Consider seismic, wind, flood, and corrosion exposure based on local hazard maps and site conditions.
- Enforce safety‑by‑design principles (constructability, lifting points, edge protection, concrete pour sequences).
Qualifications
- Licensed Civil Engineer (PRC) required; ASEP member and/or Structural Engineer (SE) eligibility is a plus.
- 3–7+ years structural design experience for low‑ to mid‑rise buildings or equivalent; exceptional juniors with strong portfolios considered.
- Proficient in ETABS/SAP2000/STAAD/SAFE and AutoCAD; Revit Structure/BIM exposure preferred.
- Strong command of reinforced concrete, steel, masonry/CHB design and detailing; working knowledge of geotechnical interfaces.
- Solid grasp of construction methods, formwork, quality control, and site execution constraints.
- Clear, concise technical writing (reports, calcs, RFIs) and stakeholder communication.
Technical Stack (nice‑to‑have)
- Analysis: ETABS, SAP2000, STAAD.Pro.
- Drafting/BIM: AutoCAD, Revit Structure, Navisworks/Clash, Bluebeam.
- Productivity: Microsoft 365/Excel (pivot, lookup), Google Workspace.
-
Bacoor, Calabarzon, Philippines Triton Constructions Development Corporation Full time ₱1,200,000 - ₱2,400,000 per yearAbout the role Triton Constructions Development Corporation is seeking a qualified and experienced QA/QC- Licensed Engineer and Materials Engineer to join our dynamic team. As a key member of our civil/structural engineering division, you will play a crucial role in ensuring the highest standards of quality and compliance across our construction projects....
-
Bldg Engineer
4 days ago
Bacoor, Calabarzon, Philippines CBRE Full time ₱600,000 - ₱1,200,000 per yearBldg Engineer - BacoorJob ID236543Posted03-Sep-2025Service lineGWS SegmentRole typeFull-timeAreas of InterestFacilities ManagementLocation(s)Bacoor - Cavite - PhilippinesAbout the Role:As a CBRE Building Engineer, you will be responsible for monitoring, maintaining and repairing building system operations and the performance of various areas including...
-
Bldg Engineer
4 days ago
Bacoor, Calabarzon, Philippines CBRE GWS IFM PHILS. CORP. Full time $60,000 - $80,000 per yearAbout the Role:As a CBRE Building Engineer, you will be responsible for monitoring, maintaining and repairing building system operations and the performance of various areas including plumbing, electrical, painting, roofing, heating, and cooling.This job is part of the Engineering and Technical Services job function. They are responsible for providing...
-
Bldg Engineer
4 days ago
Bacoor, Calabarzon, Philippines CBRE Asia Pacific Full time ₱900,000 - ₱1,200,000 per yearJob ID236543Posted03-Sep-2025Service lineGWS SegmentRole typeFull-timeAreas of InterestFacilities ManagementLocation(s)Bacoor - Cavite - PhilippinesAbout The RoleAs a CBRE Building Engineer, you will be responsible for monitoring, maintaining and repairing building system operations and the performance of various areas including plumbing, electrical,...
-
Research and Development Formulator
2 days ago
Bacoor, Calabarzon, Philippines Genie Product Concepts Manufacturing Corporation Full time ₱1,200,000 - ₱3,600,000 per yearCompany: Genie Product Concepts Manufacturing Corp.Position: Research and Development FormulatorWork Setup: Mon to Fri – Onsite, Sat - RemoteRole SummaryYou are the R&D Formulation Catalyst that drives the creation of innovative powdered beverage and beauty products from concept to prototype. This role is centered on bench chemistry, optimizing ingredient...
-
Senior Quantity Surveyor
3 weeks ago
Bacoor, Calabarzon, Philippines Outstaffer Full timeSenior Quantity Surveyor role at Outstaffer.comPositionQuantity SurveyorAbout the ClientSince 1951, the client has been creating the buildings that make up Melbourne, delivering exceptional quality commercial and residential projects and priding themselves on being a pleasure to do business with. With a clear capability for projects of scale and a commitment...
-
Product Manager
3 weeks ago
Bacoor, Calabarzon, Philippines Teamified Full time3 weeks ago Be among the first 25 applicantsIf you're passionate about what you do and are ready to take on a huge challenge, this role might be for youTo learn more about Forte and this opportunity, watch this short video: https://youtu.be/hw_OzB62APoAbout ForteForte is an award-winning world-leading education technology company that is improving the...
-
Senior AI
23 hours ago
Bacoor, Philippines Bolsterup Full timeOverview Bolsterup is transforming the construction industry with AI-powered intelligence . We're looking for an AI Engineer passionate about building agentic workflows, LLM-driven solutions, and smart automation . This role suits someone with experience at the intersection of AI, data engineering, and automation , ideally from AI SaaS, data-heavy...
-
Ai Automation Engineer
21 hours ago
Bacoor, Philippines Buscojobs Full timeJob Description About Penbrothers Penbrothers is an HR & remote talent management partner and one of the fastest-growing companies in the Philippines. We provide talented Filipinos with global opportunities in high-growth startups and dynamic companies, from the comfort of their own homes. About the Client Our client is a dynamic AI transformation firm...
-
Seo Coordinator
21 hours ago
Bacoor, Philippines Buscojobs Full time911 Seo Coordinator jobs in the Philippines Posted today Job Description Overview We are a fast-growing digital marketing agency that provides innovative solutions for the multifamily industry. Our team offers a comprehensive suite of digital services and a predictive analytics platform designed to deliver data-driven results. About Us We take pride in...
-
Technical Project Manager, Philippines
2 weeks ago
Bacoor, Philippines Pareto Full timeAbout us At Pareto.AI , we’re on a mission to enable top talent around the world to participate in the development of cutting-edge AI models. In coming years, AI models will transform how we work and create thousands of new AI training jobs for skilled talent around the world. We’ve joined forces with top AI and crowd researchers at Anthropic,...