Engineer II
3 days ago
Job Summary:
Responsible to estimate assembly and test labor hours for the semicon equipments and sub-assemblies during the quote process. Responsible for planning and conducting independent work requiring judgment in the evaluation, product understanding, application and adaptation of Manufacturing techniques, procedures and criteria. Devise new approaches to assembly and test, specifications, calculations, charts and graphs, and effectively estimate the labor hours for compliance to applicable build and quality standards.
Essential Duties and Responsibilities:
- Requires a broad knowledge of Manufacturing Practices, Assembly Prints, Bill of Materials to be able to create Manufacturing flow, lean flow, bay build approaches such as S.O.E.'s (Sequence of Events) and Assembly Process Workflow.
- Establish process for manufacturing and taking into consideration of how work instruction for assembly and test will be prepared with the labor hours estimation.
- Able to understand the flat BOM vs multi-level BOM and break it into modular assemblies and stack-up assemblies.
- Collaborate with DE (Design Engineer) to understand the Make/Buy decision and fine tune based on the stand-alone assemblies leading to buy or make decisions.
- Work with site ME Manager and Engineers to understand the capabilities and also understanding other UCT site capabilities for effective labor hours estimation.
- Initiate and support Design For Excellence and manufacturing process improvement / standardization.
- Engage with respective site IE to optimize layout and to review the labor hours in case if any doubt arises especially if it is a new type of build never done before.
- Liaise and coordinate with Design Engineering, Accounts Operations, Account Executives, Supply Chain, Quote team wheneve necessary and have doubts.
- Liaise and coordinate with Test Engineering department on testing development or testing issue to estimate test hours.
- Liaise with customer for all BOM / drawing / design issue by generating problem report / supplier problem sheet / Supplier request deviation that affects the labor hours estimation.
- Minimum CAD knowledge to analyst 3D drawing from customer.
- Understanding of routing and labor hours in SAP and MES systems.
Other Duties
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.
Knowledge, Skills and Abilities:
- Lean Manufacturing Principles, understanding of mechanical assemblies, wire routing, test.
- Familiarity with semiconductor capital equipment.
- Knowledge of electronic Work Instruction software is a plus (i.e. Sequence).
- ERP/MES System Software
- Excellent computer skills in Microsoft Suite, emphasis in Excel.
- Prior experience in manufacturing of assemblies and test is a must
- Good Interpersonal skills; ability to work alone or in team environment.
Educational/Certification Requirement
:
- Bachelor's Degree in Mechanical/Electrical/Electronics /Mechatronics/Industrial Systems Engineering with 2 years of manufacturing experience in related field.
- Diploma in Mechanical / Electrical / Electronics / Mechatronics / Industrial Systems Engineering with minimum 5 years working experience in related field can apply.
Experience Requirement:
- Minimum 2 years relevant experience (5 years for diploma holder)
- Exposure to semiconductor industry preferred.
- Experience on setting up lean line will be a plus
- Know and able to explore full BOM structure (more than 1,000 line) is needed.
- Self-motivated and resourceful
- Possesses drive with "can-do" attitude
- Capable of developing positive work relationship, a favourable work environment within the team and other functional group
- Must able to perform and demonstrate good workmanship understanding according to industrial standard.
- Good interpersonal, communication and presentation skill.
- Able to perform any other task assigned by manager / supervisor.
- Comply to work ethics and integrity.
Candidate with Six Sigma Knowledge is a plus
-
Engineer II
4 weeks ago
Lapu-Lapu City, Central Visayas, Philippines Ultra Clean Technology Full timeEngineer II role at Ultra Clean TechnologyThe following description reflects the responsibilities, qualifications and expectations for the Engineer II role. This description consolidates the original content and removes unrelated boilerplate and site-specific notices.OverviewJob Summary: Responsible to estimate assembly and test labor hours for the...
-
Mechanical Engineer II
2 days ago
Lapu-Lapu City, Central Visayas, Philippines Ultra Clean Technology Full time ₱900,000 - ₱1,200,000 per yearJoin UCT and be part of the fastest-growing sector in the world We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented...
-
Quality Engineer II
2 days ago
Lapu-Lapu City, Central Visayas, Philippines onsemi Full time ₱900,000 - ₱1,200,000 per yearI. Basic Purpose of the JobResponsible and act as customer advocate, proactively drive quality improvement activities, institutionalize closed loop quality system. Actively identify the key opportunities/ gaps and drive operations team to enable good quality of products delivered to customer. Audit & highlight any process/product/equipment abnormality on...
-
quality engineer ii
3 days ago
Lapu-Lapu City, Central Visayas, Philippines onsemi Full time ₱800,000 - ₱1,200,000 per yearJob DescriptionJob Summary:Responsible and act as customer advocate, proactively drive quality improvement activities, institutionalize closed loop quality system. Actively identify the key opportunities/ gaps and drive operations team to enable good quality of products delivered to customer. Audit & highlight any process/product/equipment abnormality on...
-
Buyer II
2 weeks ago
Lapu-Lapu City, Central Visayas, Philippines Ultra Clean Technology Full time ₱900,000 - ₱1,200,000 per yearJoin UCT and be part of the fastest-growing sector in the world We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented...
-
Customer Program Specialist II
1 week ago
Lapu-Lapu City, Central Visayas, Philippines Ultra Clean Technology Full time ₱900,000 - ₱1,200,000 per yearJoin UCTand be part ofthe fastest-growing sector in the world We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented...
-
Sr. Electrical Validation Engineer
3 days ago
Lapu-Lapu City, Central Visayas, Philippines BTCPower Cebu Inc. Full time ₱900,000 - ₱1,200,000 per yearA. ESSENTIAL DUTIES and RESPONSIBILITIES· Develop detailed test plans and validation strategies based on product requirements, standards, and use cases.· Conduct hands-on testing including performance, environmental, functional, and safety validation on prototypes and pre-production units.· Support product lifecycle...
-
Sr. Mechanical Validation Engineer
3 days ago
Lapu-Lapu City, Central Visayas, Philippines BTCPower Cebu Inc. Full time ₱900,000 - ₱1,200,000 per yearA. ESSENTIAL DUTIES and RESPONSIBILITIES· Develop and execute mechanical validation test plans based on product specifications, use cases, and applicable industry standards.· Lead efforts to repackage and redesign product housings to reflect the company's design language, ensuring mechanical performance and manufacturability are...
-
Technical Services Manager
3 days ago
Lapu-Lapu City, Central Visayas, Philippines New Moto Marketing Corporation Full time ₱1,200,000 - ₱2,400,000 per yearJob DescriptionThe Technical Services Manager leads the Technical Service and Development team, responsible for overseeing the design, implementation, and enhancement of technical service programs, customer support systems, and product development. This role is crucial to ensuring that our motorcycles maintain superior quality, performance, and reliability,...
-
Quoting Spec II
3 days ago
Lapu-Lapu City, Central Visayas, Philippines Ultra Clean Technology Full time ₱450,000 - ₱900,000 per yearJob Summary:Support Quoting & Estimating department by estimating & utilizing customer supplied BOMs & documentation to create competitive material quotes that follow required specifications for customer assemblies. (Primary location: Cebu, Philippines)Essential Duties and Responsibilities:Quoting in collaboration with Sales, Supply Chain Management, and...