Instrumentation & Control Engineer

3 weeks ago

Tanauan, Calabarzon, Philippines dnl Full time
Job SummaryUnder the direction of the Maintenance Section Head, the Instrumentation and Control Engineer is responsible for implementing approved maintenance and calibration programs, work instructions, and guidelines to ensure the quality, safety, and trouble-free operation of production equipment. The role also involves formulating work instructions and guidelines for the operation, preventive maintenance, calibration, and troubleshooting of production equipment.Duties and Responsibilities:
  • Maintenance Activities:
    • Ensure that the objectives are communicated to and properly executed by subordinates.
    • Assess and update objectives as needed.
    • Prepare requisitions for maintenance materials and supplies.
    • Ensure that completed activities are acceptable to the serviced section's requirements.
    • Participate in the prevention and control of waste in supplies, energy, manpower, and overhead costs.
    • Update and maintain equipment service and other maintenance records.
    • Monitor performance against a standard on repairs, maintenance, labor man-hours, and work center overhead costs.
    • Prepare weekly work schedules and personnel attendance records.
    • Develop predictive, preventive, and total productive maintenance programs on specific assigned systems and ensure they are carried out by technicians.
    • Perform troubleshooting on equipment.
    • Prepare and manage the budget necessary for a specific section to operate and maintain the assigned equipment.
  • Implementation of an Integrated Management System (IMS) and Good Housekeeping/Manufacturing Practices (5s and GMP):
    • Strictly follow and ensure that policies and practices are understood and conformed to by subordinates.
    • Integrated Management System (IMS)/QHSSE Policy
    • Housekeeping (5s, GMP)
    • Safety (Use of Personnel Protective Equipment (PPE), Familiarization of Safety Data Sheets (SDS or MSDS), Compliance to Safety Signs/Warnings, Use of necessary Work Permits)
    • Conduct orientation for new workers on plant safety programs, documented procedures, and work instructions.
    • Attend safety meetings/toolbox meetings regularly.
    • Conduct Aspect/Impact and Hazard/Risk assessment review annually or as needed.
    • Conduct daily inspections of the work area and report any observed safety issues, unsafe acts, or conditions, and recommend corrective and preventive actions.
    • Ensure the enforcement and implementation of corrective, preventive, and improvement action plans in the workplace.
  • Manpower:
    • Direct assigned manpower.
    • Offer counsel, guidance, or coaching as required to meet maintenance goals/targets and to correct unnecessary behaviors.
    • Assist in the recruitment, training, and performance evaluation of subordinates.
    • Suggest training needs for subordinates and update the training plan.
    • Strictly follow and cascade company personnel policies, rules, and regulations to subordinates.
Qualification and Education Requirements:
  • Education:
    • BS in Electrical, Electronics, or Instrumentation Engineering; preferably with a license.
  • Experience:
    • At least three (3) years of experience as a Maintenance Engineer in the operation, maintenance, troubleshooting, and repairs of equipment in manufacturing or industrial plants.
  • Skills:
    • Knowledge of basic computer applications such as MS Word, Excel, and PowerPoint.
    • Good oral and written communication skills.
    • Knowledge of Root Cause Analysis and Basic Problem Solving Techniques.
    • Knowledge of Hazard Analysis and Critical Control Points (HACCP).
    • Knowledge of Aspect/Impact and Hazard/Risk Assessment.
    • Knowledge of Good Manufacturing Practices (GMP).
    • Knowledge in SCADA, DCS, and PLC.
Core Competencies:
  • Must have a high level of integrity and be able to work with other departments in a collaborative manner.
  • Ability to interact in a matrix organization, driving results based on OKR (Objective Key Results).
  • Must immerse oneself in the corporate values of D&L and act as a role model in keeping the values working.
Performance Indicator:
  • Develop individual Objective Key Results (OKR) based on management prerogative, which shall center on equipment performance. OKR actions may include energy conservation, cost reduction, productivity, and compliance.
  • Support plans for opportunity improvements to help manage factory efficiency, such as PM adherence and equipment availability.
#J-18808-Ljbffr

  • Instrumentation & Control Engineer

    2 weeks ago

    Tanauan, Calabarzon, Philippines D & L Industries Full time ₱20,000 - ₱25,000 per year

    Job SummaryUnder the direction of the Maintenance Section Head, the Instrumentation and Control Engineer is responsible for implementing approved maintenance and calibration programs, work instructions, and guidelines to ensure the quality, safety, and trouble-free operation of production equipment. The role also involves formulating work instructions and...

  • Instrumentation & Control Engineer (NAC-ING)

    2 weeks ago

    Tanauan, Calabarzon, Philippines D & L Industries Full time $50,000 - $100,000 per year

    Job SummaryUnder the direction of the Maintenance Section Head, the Instrumentation and Control Engineer is responsible for implementing approved maintenance and calibration programs, work instructions, and guidelines to ensure the quality, safety, and trouble-free operation of production equipment. The role also involves formulating work instructions and...

  • Electrical, Instrumentation, and Automation Supervisor

    2 weeks ago

    Tanauan, Calabarzon, Philippines Private Advertiser Full time ₱800,000 - ₱1,200,000 per year

    Main Responsibilities:Ensure the good operating condition of all hydraulic, pneumatic, electrical and electronic instruments and equipment in his area of responsibility.Ensure the fast and reliable calibration, repair, testing and preventive maintenance of all hydraulic, pneumatic, electrical and electronic instrument and equipment in his/her area of...

  • Control Room Engineer

    1 week ago

    Tanauan, Calabarzon, Philippines AboitizPower Full time

    OverviewJob ID: 2883Location: CalauanCompany: AP Renewables Inc.Department: Production - MGPEmployment Type: RegularWork Arrangement: On-SiteResponsibilitiesWhat-How-WhyPlant OperationOptimizes the efficiency of generating units by regular and close monitoring of the parameters. Use all available platforms and monitoring files to determine the deviation from...

  • Electrical Engineer

    2 weeks ago

    Tanauan, Calabarzon, Philippines D & L Industries Full time $80,000 - $120,000 per year

    DUTIES AND RESPONSIBILITIES:Coordinates with maintenance & production planners, production supervisor, spares warehouse and other relevant personnel before start of and at the end of repair, maintenance, projects and any other activities carried out by him or his team.Ensures that the workmanship and quality of repair, maintenance or fabrications are in...

  • Document Control Staff

    2 weeks ago

    Tanauan, Calabarzon, Philippines VENETO QUARTZ, INC. Full time $40,000 - $60,000 per year

    Receive, log, track, and distribute incoming and outgoing documents, drawings, and correspondence.Maintain document registers, control logs, and filing systems (electronic and hard copy).Ensure proper document formatting, version control, and compliance with naming conventions.Control and track document revisions and ensure obsolete versions are removed from...

  • QA Analyst

    2 weeks ago

    Tanauan, Calabarzon, Philippines D & L Industries Full time $40,000 - $60,000 per year

    DUTIES AND RESPONSIBILITIES: PERIODICALLYPerforms re-checking of materials stored in the warehouse to ensure their specifications are still within limits. Provides training to the reporting personnel when a new test method, new analytical technique, and new QA system is introduced. Initiates the review and evaluation of the sections' current quality system...

  • QA Analyst

    6 days ago

    Tanauan, Calabarzon, Philippines D & L Industries Full time $104,000 - $130,878 per year

    DUTIES AND RESPONSIBILITIES:PERIODICALLYPerforms re-checking of materials stored in the warehouse to ensure their specifications are still within limits.Provides training to the reporting personnel when a new test method, new analytical technique, and new QA system is introduced.Initiates the review and evaluation of the sections' current quality system and...

  • Mechanical Engineer

    1 week ago

    Tanauan, Calabarzon, Philippines GNPower Dinginin & GNPower Mariveles Full time

    OverviewJob ID: 2946Location: CalauanCompany: AP Renewables Inc.Department: Reliability Centered Maintenance - MGPEmployment Type: ProbationaryWork Arrangement: On-SiteResponsibilitiesThe Mechanical Engineer is responsible for supervising the maintenance and repair of mechanical systems and equipment (excluding Main Turbine and Turbine Control Systems) in...

  • Calibration Engineer

    2 weeks ago

    Tanauan, Calabarzon, Philippines Collins Aerospace Full time $104,000 - $130,878 per year

    Date Posted: Country:PhilippinesLocation:Lot 18 3rd Street, First Philippine Industrial Park, Tanauan City, Batangas, PhilippinesPosition Role Type:UnspecifiedCALIBRATON ENGINEER (P1/P2)Job DescriptionKey ResponsibilitiesPlan and implement calibration schedules of M&TEsCollaborate with external calibration provider and M&TE owner on the onsite and offsite...