Test/Repair Operator

4 weeks ago


Philippines Central Visayas Teradyne Full time
Duties And Responsibilities

  • Keen attention to details, 100% compliance to PCBA handling procedures, must be physically able to pick-up PCBA Assemblies and place inside a system or TBUs.
  • Run the full test procedures of Teradyne PCBAs based on the define procedure. Doing so will include activities such as (but not limited to) installing PCBA assemblies into a test system or TBUs, connecting/disconnecting interface cables, power supply cables, DIBs, and other necessary fixtures/cables, then loading and running the correct automated test program.
  • Interpret failure datalog from test programs and follow a define troubleshooting steps to fix the PCBA; escalating to Technician, Engineer, or Supervisor for failures that are not yet defined.
  • Run a number of define specific steps to properly fix the PCBA performing repetitive defined testing and troubleshooting procedures.
  • Works with the Board Repair Specialist (BRS) and Test Engineer in process and quality improvements, reliability issues as well as meeting department/section goals.
  • Perform visual inspection to ensure units has been reassembled/rework.

Qualifications

Basic Qualifications, Experience, Skills & Education Required:

  • Electronics Technology or Industrial Electronics graduates with relevant experience in board repair
  • Knowledgeable in electronics board troubleshooting, de/soldering, and repair
  • Experience in hardware/software validation and verification for medium and high-end testers is an advantage.
  • Goal and results-oriented, assertive, and hardworking
  • Computer literate

  • Test/Repair Operator

    4 weeks ago


    Central Visayas, Philippines Teradyne Full time

    Role FunctionsPerform incoming and outgoing visual inspection of Printed Circuit Board Assemblies (PCBA)Perform assembly and disassembly of PCBAsRun required test processes, including activities such as (but not limited to) installing PCBA into testers, attaching/disconnecting interface and power supply cables, installing device interface boards, and running...

  • Test/Repair Operator

    4 weeks ago


    Philippines, Central Visayas Teradyne Full time

    Duties And Responsibilities Perform visual inspection to ensure units has been reassembled/rework. Keen attention to details, 100% compliance to PCBA handling procedures, must be physically able to pick-up PCBA Assemblies and place inside a system or TBUs. Run the full test procedures of Teradyne PCBAs based on the define procedure. Doing so will include...

  • Test Technician

    4 weeks ago


    Philippines, Central Visayas Teradyne Full time

    Duties & ResponsibilitiesThe Board Repair Specialist is responsible in the debug and quality repair of defective boards.He/She is likewise expected to do first level system maintenance. Other responsibilities also include working with the Test Engineer in process requirements, quality improvements, reliability issues, as well as meeting repair...


  • Philippines Acro Distribution Network, Inc. Full time

    Company DescriptionAcro Distribution Network, Inc envisions to be the most efficient and reliable transportation and warehousing company in the industry, providing seamless logistics solutions to our clients.Role DescriptionThis is a full-time on-site role as a Repairs and Maintenance Manager located in Muntinlupa City. The Repairs and Maintenance Manager...


  • Quezon City, Philippines Jollibee Group of Companies Full time

    Title: Facilities Repairs And Maintenance SpecialistThis Repairs & Maintenance Specialist is responsible for the management of all service engineering-related activities for new and renovated stores for all SBUs in his assigned area.Installation, testing, & commissioning of equipment for new storesManage schedules and actual site installation of kitchen...

  • Beauty Salon Manager

    4 weeks ago


    Central Visayas, Philippines Workable Middleware Test Company Full time

    GA Certification, a well-established beauty and wellness company, is seeking an experienced Beauty Salon Manager to lead and oversee the operations of our salon. The Beauty Salon Manager will be responsible for managing a team of beauty professionals, ensuring exceptional customer service, and achieving business targets. The ideal candidate should have a...

  • Aircon Technician

    4 weeks ago


    Central Visayas, Philippines NUSTAR Resort Full time

    DepartmentFacilities & EngineeringEmployee TypeProbationaryJob Responsibilities Performs all the duties of an HVAC Mechanic. Performs repairs for the heating, ventilation, air-conditioning and refrigeration systems in the hotel facilities. Respond and attend to guest repair requests. Communicate with guests or staff to resolve any HVAC maintenance issues....

  • Handyman

    4 weeks ago


    Central Visayas, Philippines NUSTAR Resort Full time

    DepartmentProperty OperationEmployee TypeProbationaryJob ResponsibilitiesExperienced on Operations and Maintenance during duty shift of the following Mechanical, Electrical, Plumbing and Fire-Pro Systems:Performs basic tasks including painting, clean facilities and managing maintenance repairs.Detects and reports the need for major maintenance...


  • Central Visayas, Philippines Cebu World Laminate, Inc. Full time

    Qualifications Bachelor's Degree in Mechanical Engineering, Electrical Engineering, communications engineering, or relevant courses. Minimum of 5 years of experience in repair and maintenance services including electrical, mechanical, plumbing, fabrication works, and troubleshooting. With at least 2 years of supervisory experience. Experience in actual...


  • Philippines, Central Visayas Filinvest Development Corporation Full time

    The Water Distribution Operator, reporting to the Water Distribution Engineer, will provide support on the operation of the water distribution system network in Filinvest Properties.KEY FUNCTIONS/DUTIES AND RESPONSIBILITIES:Maintaining and monitoring of deepwell operations within the assigned Filinvest Properties ensuring its compliance with Philippine...


  • Philippines, Olongapo, Central Luzon Subic Drydock Corporation Full time

    Duties And Responsibilities Perform preventative and predictive maintenance on facility machinery. Keeps equipment available for use by inspecting and testing vehicles; completing preventive maintenance such as, engine tune-ups, oil changes, tire rotation and changes, wheel balancing, replacing filters. Maintains vehicle functional condition by...


  • Philippines, Central Visayas Dynata Full time

    Identify, define, and solve basic problems.Ensure solutions meet specificationsParticipate in collaborative relationships.Support organizational changes.Monitor computer networks for security issues. Investigate security breaches and other cyber security incidents. Install security measures and operate software to protect systems and information...

  • Network Administrator

    2 weeks ago


    Philippines, Central Visayas Datamatics Careers- Philippines Full time

    JOB DETAILS:- Network management- Knowledge of handling Cisco Devices.- Installs, upgrades, repairs, configures, tests, monitors, optimizes and supports all LAN/WAN network hardware.- Develops and maintains network architecture documentation.- Assists with developing, testing, and maintaining disaster recovery plans and procedures.- Assists with maintaining...


  • Danao, Central Visayas, Philippines Jollibee Group of Companies Full time

    Title: Engineering TechnicianThe Engineering Technician is responsible for monitoring, troubleshooting, and conducting repairs of refrigeration systems, compressed air systems, power systems, steam systems, and preventive maintenance activities.Provides mechanical technical services necessary for the installation of production, utility, and other support...

  • Machine Operator

    4 weeks ago


    Philippines, Central Luzon, Guiguinto North Taal Steel Corp. Full time

    Assist in the installation, maintenance, and repair of machinery.Operate tools in order to aid in the manufacturing process.Perform periodic checks on equipment and solve problems as detected.Work with others in order to ensure that equipment is in proper working order.Observe and follow company safety rules and regulations.


  • Philippines GHD Group Full time

    JOB DESCRIPTIONHelp us build the future and we'll help you build a rewarding and purposeful career.Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal.Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you...


  • Philippines, Central Visayas Dynata Full time

    To manage penetration testing of both applications and infrastructureTo perform susceptibility scans and manage the resolution of threats To assess Software as a Service(SaaS) products for security compliance To manage security applications, such as GDPRTo conduct periodic user access control verifications To develop and maintain securitymonitoring, logging...


  • Philippines AVALOQ Philippines Operating Headquarters Full time

    As a Software Test Engineerfor Avaloq, you will be creating and maintaining automated tests for the Avaloq Smart Client and APIs.Your key tasksCreate and maintain test cases for the ABR/S baseline. Translate use case and test case documents into automated test cases. Fix or adapt the test cases if deemed necessary.Perform business as usual operations such as...


  • Philippines People Link HR Consulting Inc. Full time

    Operate, drive, and control heavy equipment.Load and unload equipment from vehicles.Have complete knowledge of machine settings.Check and maintain equipment functionality often.Keep performance records of machine functionality regularly.Provide preemptive maintenance on equipment to prevent malfunction.Comply with the company’s safety policies and...


  • Philippines People Link HR Consulting Inc. Full time

    Operate, drive, and control heavy equipment.Load and unload equipment from vehicles.Have complete knowledge of machine settings.Check and maintain equipment functionality often.Keep performance records of machine functionality regularly.Provide preemptive maintenance on equipment to prevent malfunction.Comply with the company's safety policies and...